ProntoNet Family
Legacy Audio Codec family for IP, ISDN and X21.
Fill in the form below to access support.
Don’t have an account? Register
- Latest version
- Support files
- Legacy
Version 6.9.3 – 04/04/2017
Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using ProdysFlashPlus version 3.0.8 or higher. In case your ProdysFlashPlus version is not the latest one, please download the latest version. In case an improper version of ProdysFlashPlus is used, the unit would not be upgraded correctly and might not start properly.
REMARKS:
OLD PRONTONET UNITS WITH SERIAL NUMBER 8938/XXXXX MUST NOT BE UPGRADED TO THIS FIRMWARE VERSION. THE UNIT MIGHT BECOME UNOPERABLE. THE LAST OPERATIVE VERSION FOR THOSE CODECS IS 6.7.5 . THIS ALSO APPLIES TO DISCONTINUED PORTANET DEVICES.
To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of ProdysFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.
ProdysFlashPlus v.3.3.7.zip
Firmware Update Utility: This version of ProdysFlashPlus MUST be used in case of upgrading to firmware version 6.7.8 or higher.
Prodys IP Family User Manual Rev6.9
Prontonet Hardware and Reference Manual Rev2.3
ProntonetLC Hardware and Reference Manual Rev2.3
Prontonet IP Decoder HW and Reference Manual Rev2.2
Nereus Hardware and Reference Manual Rev1.6
Nereus One Hardware and Reference Manual Rev1.5
NomadaIPW Hardware and Reference Manual Rev1.5
Nomada IPXL Hardware and Reference Manual Rev2.0
ProntoNet SDK User’s Manual v2.5.4
Software Development Kit User Manual.
ProntoNet SDK User’s Manual v2.5.4
Software Development Kit User Manual.
SolidStream White Paper v03
SolidStream by Prodys enables transmission of STL-grade audio quality over inexpensive IP links such as xDSL connections and 3G/4G links.
Device Backup rev03
Configuration of the N+k function (Device BackUp).
Jitter Buffer Settings eng rev03
Configuration of the jitter buffer, including the new automatic configuration option.
Prodys Double LAN interface.pdf
Configuration and usage of the second LAN interface for control.
Prodys VLAN support.pdf
VLAN configuration on Prodys IP devices.
Version 6.9.1 – 03/03/2016
ProntoNet Family v691.hff
Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using ProdysFlashPlus version 3.0.8 or higher. In case your ProdysFlashPlus version is not the latest one, please download the latest version. In case an improper version of ProdysFlashPlus is used, the unit would not be upgraded correctly and might not start properly.
REMARKS:
OLD PRONTONET UNITS WITH SERIAL NUMBER 8938/XXXXX MUST NOT BE UPGRADED TO THIS FIRMWARE VERSION. THE UNIT MIGHT BECOME UNOPERABLE. THE LAST OPERATIVE VERSION FOR THOSE CODECS IS 6.7.5 . THIS ALSO APPLIES TO DISCONTINUED PORTANET DEVICES.
To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of ProdysFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.
ProdysFlashPlus v3.2.4.zip
Firmware Update Utility: This version of ProdysFlashPlus MUST be used in case of upgrading to firmware version 6.7.8 or higher.
Prodys IP Family User Manual Rev6.9
Prontonet Hardware and Reference Manual Rev2.3
ProntonetLC Hardware and Reference Manual Rev2.3
Prontonet IP Decoder HW and Reference Manual Rev2.2
Nereus One Hardware and Reference Manual Rev1.5
Nereus Hardware and Reference Manual Rev1.6
NomadaIPW Hardware and Reference Manual Rev1.5
Nomada IPXL Hardware and Reference Manual Rev2.0
ProntoNet Family – What’s new 6.9.1
OCXManualInstall 6.9.1.zip
Manual installation of the ActiveX control of the web control page, for those computers not allowing ActiveX installation for security reasons.
ProntoNet SDK User’s Manual v2.5.4
Software Development Kit User Manual.
Version 6.8.4 – 10/02/2015
ProntoNet Family v684.hff
Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using ProdysFlashPlus version 3.0.8 or higher. In case your ProdysFlashPlus version is not the latest one, please download the latest version. In case an improper version of ProdysFlashPlus is used, the unit would not be upgraded correctly and might not start properly.
REMARKS:
OLD PRONTONET UNITS WITH SERIAL NUMBER 8938/XXXXX MUST NOT BE UPGRADED TO THIS FIRMWARE VERSION. THE UNIT MIGHT BECOME UNOPERABLE. THE LAST OPERATIVE VERSION FOR THOSE CODECS IS 6.7.5 . THIS ALSO APPLIES TO DISCONTINUED PORTANET DEVICES.
To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of ProdysFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.
ProdysFlashPlus v3.2.0.zip
Firmware Update Utility: This version of ProdysFlashPlus MUST be used in case of upgrading to firmware version 6.7.8 or higher.
Prodys IP Family User Manual Rev6.9
Prontonet Hardware and Reference Manual Rev2.2
ProntonetLC Hardware and Reference Manual Rev2.2
Prontonet IP Decoder HW and Reference Manual Rev2.2
Nereus Hardware and Reference Manual Rev1.4
Nereus One Hardware and Reference Manual Rev1.5
NomadaIPW Hardware and Reference Manual Rev1.4
Nomada IPXL Hardware and Reference Manual Rev2.0
ProntoNet Family – What’s new 6.8.4
OCXManualInstall 6.8.4.zip
Manual installation of the ActiveX control of the web control page, for those computers not allowing ActiveX installation for security reasons.
ProntoNet SDK User’s Manual v2.5.3
Software Development Kit User Manual.
Version 6.8.1 – 07/07/2014
ProntoNet Family v681.hff
Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using ProdysFlashPlus version 3.0.8 or higher. In case your ProdysFlashPlus version is not the latest one, please download the latest version. In case an improper version of ProdysFlashPlus is used, the unit would not be upgraded correctly and might not start properly.
REMARKS:
OLD PRONTONET UNITS WITH SERIAL NUMBER 8938/XXXXX MUST NOT BE UPGRADED TO THIS FIRMWARE VERSION. THE UNIT MIGHT BECOME UNOPERABLE. THE LAST OPERATIVE VERSION FOR THOSE CODECS IS 6.7.5 . THIS ALSO APPLIES TO DISCONTINUED PORTANET DEVICES.
To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of ProdysFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.
ProdysFlashPlus v3.1.7.zip
Firmware Update Utility: This version of ProdysFlashPlus MUST be used in case of upgrading to firmware version 6.7.8 or higher.
Prodys IP Family User Manual Rev6.9
Prontonet Hardware and Reference Manual Rev2.2
ProntonetLC Hardware and Reference Manual Rev2.2
Prontonet IP Decoder HW and Reference Manual Rev2.2
Nereus Hardware and Reference Manual Rev1.4
Nereus One Hardware and Reference Manual Rev1.4
NomadaIPW Hardware and Reference Manual Rev1.4
Nomada IPXL Hardware and Reference Manual Rev2.0
ProntoNet Family – What’s new 6.8.1
OCXManualInstall 6.8.1.zip
Manual installation of the ActiveX control of the web control page, for those computers not allowing ActiveX installation for security reasons.
ProntoNet SDK User’s Manual v2.5.3
Software Development Kit User Manual.
Version 6.7.5 – 20/12/2013
ProntoNet Family v675.hff
Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using ProdysFlashPlus version 3.0.8 or higher. In case your ProdysFlashPlus version is not the latest one, please download the latest version. In case an improper version of ProdysFlashPlus is used, the unit would not be upgraded correctly and might not start properly.
To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of ProdysFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.
Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.
Prodys IP Family User Manual Rev6.8
Prontonet Hardware and Reference Manual Rev2.2
ProntonetLC Hardware and Reference Manual Rev2.2
Prontonet IP Decoder HW and Reference Manual Rev2.2
Nereus Hardware and Reference Manual Rev1.4
Nereus One Hardware and Reference Manual Rev1.4
NomadaIPW Hardware and Reference Manual Rev1.4
Nomada IPXL Hardware and Reference Manual Rev2.0
ProntoNet Family – What’s new 6.7.5
OCXManualInstall 6.7.5.zip
Manual installation of the ActiveX control of the web control page, for those computers not allowing ActiveX installation for security reasons.
ProntoNet SDK User’s Manual v2.5.3
Software Development Kit User Manual.
Version 6.6.8 – 28/02/2013
ProntoNet Family v668.hff
Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using ProdysFlashPlus version 3.0.8 or higher. In case your ProdysFlashPlus version is not the latest one, please download the latest version. In case an improper version of ProdysFlashPlus is used, the unit would not be upgraded correctly and might not start properly.
To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of ProdysFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.
ProdysFlashPlus v3.1.1.zip
Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.
Prodys IP Family User Manual Rev6.7
Prontonet Hardware and Reference Manual Rev2.2
ProntonetLC Hardware and Reference Manual Rev2.2
Prontonet IP Decoder HW and Reference Manual Rev2.2
Nereus Hardware and Reference Manual Rev1.4
Nereus One Hardware and Reference Manual Rev1.4
NomadaIPW Hardware and Reference Manual Rev1.3
NomadaIPXL Hardware and Reference Manual Rev1.9
ProntoNet Family – What’s new 6.6.8
OCXManualInstall 6.6.8.zip
Manual installation of the ActiveX control of the web control page, for those computers not allowing ActiveX installation for security reasons.
ProntoNet SDK User’s Manual v2.5.3
Software Development Kit User Manual.
Version 6.6.6 – 18/10/2012
ProntoNet Family v666.hff
Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using ProdysFlashPlus version 3.0.8 or higher. In case your ProdysFlashPlus version is not the latest one, please download the latest version. In case an improper version of ProdysFlashPlus is used, the unit would not be upgraded correctly and might not start properly.
To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of ProdysFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.
ProdysFlashPlus v3.1.1.zip
Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.
Prodys IP Family User Manual Rev6.7
Prontonet Hardware and Reference Manual Rev2.2
ProntonetLC Hardware and Reference Manual Rev2.2
Prontonet IP Decoder HW and Reference Manual Rev2.2
Nereus Hardware and Reference Manual Rev1.4
Nereus One Hardware and Reference Manual Rev1.4
NomadaIPW Hardware and Reference Manual Rev1.3
NomadaIPXL Hardware and Reference Manual Rev1.9
ProntoNet Family – What’s new 6.6.6
OCXManualInstall 6.6.6.zip
Manual installation of the ActiveX control of the web control page, for those computers not allowing ActiveX installation for security reasons.
ProntoNet SDK User’s Manual v2.4.2
Software Development Kit User Manual.
Versión 6.6.3 – 26/03/2012
ProntoNet Family v663.hff
Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using ProdysFlashPlus version 3.0.8 or higher. In case your ProdysFlashPlus version is not the latest one, please download the latest version. In case an improper version of ProdysFlashPlus is used, the unit would not be upgraded correctly and might not start properly.
To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of ProdysFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.
ProdysFlashPlus v3.1.1.zip
Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.
Prodys IP Family User Manual Rev6.6
Prontonet Hardware and Reference Manual Rev2.2
ProntonetLC Hardware and Reference Manual Rev2.2
Prontonet IP Decoder HW and Reference Manual Rev2.2
Nereus Hardware and Reference Manual Rev1.3
Nereus One Hardware and Reference Manual Rev1.3
NomadaIPW Hardware and Reference Manual Rev1.3
NomadaIPXL Hardware and Reference Manual Rev1.9
ProntoNet Family – What’s new 6.6.3
OCXManualInstall 6.6.3.zip
Manual installation of the ActiveX control of the web control page, for those computers not allowing ActiveX installation for security reasons.
ProntoNet SDK User’s Manual v2.4.0
Software Development Kit User Manual.
Versión 6.4.9 – 28/09/2011
ProntoNet Family v649.hff
Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using ProdysFlashPlus version 3.0.8 or higher. In case your ProdysFlashPlus version is not the latest one, please download the latest version. In case an improper version of ProdysFlashPlus is used, the unit would not be upgraded correctly and might not start properly.
To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of ProdysFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.
Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.
Prodys IP Family User Manual Rev6.4a
>Prontonet Hardware and Reference Manual Rev2.1
ProntonetLC Hardware and Reference Manual Rev2.1
Prontonet IP Decoder HW and Reference Manual Rev2.1
Nereus Hardware and Reference Manual Rev1.3
Nereus One Hardware and Reference Manual Rev1.3
NomadaIPW Hardware and Reference Manual Rev1.2
NomadaIPXL Hardware and Reference Manual Rev1.8</a
ProntoNet Family – What’s new 6.4.9
OCXManualInstall 6.4.9.zip
Manual installation of the ActiveX control of the web control page, for those computers not allowing ActiveX installation for security reasons.
ProntoNet SDK User’s Manual v2.3.8
Software Development Kit User Manual.
Version 6.3.7 – 18/03/2011
ProntoNet Family v637.hff
Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using HeraFlashPlus version 2.7.0 or higher. In case your HeraFlashPlus version is not the latest one, please download the latest version.
To upgrade a unit to a firmware version equal or higher than 6.3.3, it is necessary to use HeraFlashPlus version 3.0.6 or higher. In case an improper version of HeraFlashPlus is used, the unit would not be upgraded correctly and might not start properly, but even though, it would be still able to get upgraded via HeraFlashPlus version 3.0.6 or higher.
To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of HeraFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.
HeraFlashPlus v3.0.6.zip
Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.
Prodys IP Family User Manual Rev6.3c
Prontonet Hardware and Reference Manual Rev2.1
ProntonetLC Hardware and Reference Manual Rev2.1
Prontonet IP Decoder HW and Reference Manual Rev2.1
Nereus Hardware and Reference Manual Rev1.2
Nereus One Hardware and Reference Manual Rev1.2
NomadaIPW Hardware and Reference Manual Rev1.2
NomadaIPXL Hardware and Reference Manual Rev1.8
ProntoNet Family – What’s new 6.3.7
OCXManualInstall 6.3.7.zip
Manual installation of the ActiveX control of the web control page, for those computers not allowing ActiveX installation for security reasons.
ProntoNet SDK User’s Manual v2.3.7
Software Development Kit User Manual.
Version 6.3.4 – 22/10/2010
ProntoNet Family v634.hff
Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using HeraFlashPlus version 2.7.0 or higher. In case your HeraFlashPlus version is not the latest one, please download the latest version.
To upgrade a unit to a firmware version equal or higher than 6.3.3, it is necessary to use HeraFlashPlus version 3.0.6 or higher. In case an improper version of HeraFlashPlus is used, the unit would not be upgraded correctly and might not start properly, but even though, it would be still able to get upgraded via HeraFlashPlus version 3.0.6 or higher.
To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of HeraFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.
HeraFlashPlus v3.0.6.zip
Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.
Prodys IP Family User Manual Rev6.3b
Prontonet Hardware and Reference Manual Rev1.2
ProntonetLC Hardware and Reference Manual Rev1.2
Prontonet IP Decoder HW and Reference Manual Rev1.1
Nereus Hardware and Reference Manual Rev1.2
Nereus One Hardware and Reference Manual Rev1.2
NomadaIPW Hardware and Reference Manual Rev1.1
NomadaIPXL Hardware and Reference Manual Rev1.7
ProntoNet Family – What’s new 6.3.4
OCXManualInstall 6.3.4.zip
Manual installation of the ActiveX control of the web control page, for those computers not allowing ActiveX installation for security reasons.
ProntoNet SDK User’s Manual v2.3.7
Software Development Kit User Manual.
Version 6.3.3 – 01/07/2010
ProntoNet Family v633.hff
Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using HeraFlashPlus version 2.7.0 or higher. In case your HeraFlashPlus version is not the latest one, please download the latest version.
To upgrade a unit to a firmware version equal or higher than 6.3.3, it is necessary to use HeraFlashPlus version 3.0.6 or higher. In case an improper version of HeraFlashPlus is used, the unit would not be upgraded correctly and might not start properly, but even though, it would be still able to get upgraded via HeraFlashPlus version 3.0.6 or higher.
To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of HeraFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.
Prodys IP Family User Manual Rev6.3
ProntoNet Family – What’s new 6.3.3
OCXManualInstall 6.3.3.zip
Manual installation of the ActiveX control of the web control page, for those computers not allowing ActiveX installation for security reasons.
ProntoNet SDK User’s Manual v2.3.6
Software Development Kit User Manual.
Version 6.2.4 – 29/01/2010
ProntoNet Family v624.hff
Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using HeraFlashPlus version 2.7.0 or higher. In case your HeraFlashPlus version is not the latest one, please download the latest version.
This version is based on version 6.2.3 with one only change, fixing a bug related to the ISDN BackUp feature. Only in case the customer is using the unit with the ISDN line as a backUp of the IP link it is advisable to download this firmware verion and avoid using version 6.2.3 or version 6.1.1
To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of HeraFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.
Version 6.2.3 – 18/01/2010
ProntoNet Family v623.hff
Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using HeraFlashPlus version 2.7.0 or higher. In case your HeraFlashPlus version is not the latest one, please download the latest version.
To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of HeraFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.
HeraFlashPlus v2.8.5.zip
Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.
Prodys IP Family User Manual Rev6.1
Prontonet Hardware and Reference Manual Rev1.2
ProntonetLC Hardware and Reference Manual Rev1.2
Prontonet IP Decoder HW and Reference Manual Rev1.1
Nereus Hardware and Reference Manual Rev1.0
Nereus One Hardware and Reference Manual Rev1.2
NomadaIPW Hardware and Reference Manual Rev1.0
NomadaIPXL Hardware and Reference Manual Rev1.5
ProntoNet Family – What’s new 6.2.3
OCXManualInstall 6.2.3.zip
Manual installation of the ActiveX control of the web control page, for those computers not allowing ActiveX installation for security reasons.
ProntoNet SDK User’s Manual v2.3.4
Software Development Kit User Manual.
Version 6.1.1 – 26/10/2009
ProntoNet Family v611.hff
Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using HeraFlashPlus version 2.7.0 or higher. In case your HeraFlashPlus version is not the latest one, please download the latest version.
To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of HeraFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly
HeraFlashPlus v2.8.4.zip<
Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.
Prodys IP Family User Manual Rev6.1
Prontonet Hardware and Reference Manual Rev1.2
ProntonetLC Hardware and Reference Manual Rev1.2
Prontonet IP Decoder HW and Reference Manual Rev1.1
Nereus Hardware and Reference Manual Rev1.0
Nereus One Hardware and Reference Manual Rev1.2
ProntoNet Family – What’s new 6.1.1
OCXManualInstall 6.1.1.zip
Manual installation of the ActiveX control of the web control page, for those computers not allowing ActiveX installation for security reasons.
ProntoNet SDK User’s Manual v2.3.4
Software Development Kit User Manual.
Version 6.0.5 – 25/03/2009
ProntoNet Family v605.hff
Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using HeraFlashPlus version 2.7.0 or higher. In case your HeraFlashPlus version is not the latest one, please download the latest version.
To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of HeraFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.
HeraFlashPlus v2.8.1.zip
Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.
Prodys IP Family User Manual Rev6.1
Prontonet Hardware and Reference Manual Rev1.2
ProntonetLC Hardware and Reference Manual Rev1.0
Prontonet IP Decoder HW and Reference Manual Rev1.0
Nereus Hardware and Reference Manual Rev1.0
Nereus One Hardware and Reference Manual Rev1.0
ProntoNet Family – What’s new 6.0.5
ProntoNet SDK User’s Manual v2.3.2
Software Development Kit User Manual.
Version 6.0.1 – 17/10/2008
ProntoNet Family v601.hff
Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using HeraFlashPlus version 2.7.0 or higher. In case your HeraFlashPlus version is not the latest one, please download the latest version.
To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of HeraFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly
HeraFlashPlus v2.8.1.zip
Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.
Prodys IP Family User Manual Rev6.1
Prontonet Hardware and Reference Manual Rev1.2
ProntonetLC Hardware and Reference Manual Rev1.0
Prontonet IP Decoder HW and Reference Manual Rev1.0
Nereus Hardware and Reference Manual Rev1.0
>Nereus One Hardware and Reference Manual Rev1.0
ProntoNet Family – What’s new 6.0.1
ProntoNet SDK User’s Manual v2.2.0
Software Development Kit User Manual.
Version 5.9.1 – 23/07/2008
ProntoNet Family v591.hff
Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using HeraFlashPlus version 2.7.0 or higher. In case your HeraFlashPlus version is not the latest one, please download the latest version.
To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of HeraFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade pro
HeraFlashPlus v2.7.0.zip
Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.
Prontonet User Manual Rev5.4.1.2
ProntonetLC User Manual Rev5.4.1.2
Prontonet IP Decoder User Manual Rev5.4.1.1
Nereus One User Manual Rev5.4.1.2
ProntoNet Family – What’s new 5.9.1
ProntoNet SDK User’s Manual v2.2.0
Software Development Kit User Manual.
Version 5.8.0 – 13/06/2008
ProntoNet Family v580.hff
Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using HeraFlashPlus version 2.7.0 or higher. In case your HeraFlashPlus version is not the latest one, please download the latest version.
To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of HeraFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.
HeraFlashPlus v2.7.0.zip
Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.
Prontonet User Manual Rev5.4.1.2
ProntonetLC User Manual Rev5.4.1.2
Prontonet IP Decoder User Manual Rev5.4.1.1
Nereus One User Manual Rev5.4.1.2
ProntoNet Family – What’s new 5.8.0
ProntoNet SDK User’s Manual v2.2.0
Software Development Kit User Manual.
Versión 5.7.0 – 01/04/2008
ProntoNet Family v570.hff
Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using HeraFlashPlus version 2.7.0 or higher. In case your HeraFlashPlus version is not the latest one, please download the latest version.
To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of HeraFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.
HeraFlashPlus v2.7.0.zip
Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.
Prontonet User Manual Rev5.4.1.2
ProntonetLC User Manual Rev5.4.1.2
Prontonet IP Decoder User Manual Rev5.4.1.1
Nereus One User Manual Rev5.4.1.2
ProntoNet Family – What’s new 5.7.0
ProntoNet SDK User’s Manual v2.2.0
Software Development Kit User Manual.
Version 5.6.2 – 05/03/2008
ProntoNet Family v562.hff
Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using HeraFlashPlus version 2.7.0 or higher. In case your HeraFlashPlus version is not the latest one, please download the latest version.
To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of HeraFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.
HeraFlashPlus v2.7.0.zip
Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.
Prontonet User Manual Rev5.4.1.2
ProntonetLC User Manual Rev5.4.1.2
Prontonet IP Decoder User Manual Rev5.4.1.1
Nereus One User Manual Rev5.4.1.2
ProntoNet Family – What’s new 5.6.2
ProntoNet SDK User’s Manual v2.2.0
Software Development Kit User Manual.
Version 5.5.0 – 22/11/2007
ProntoNet Family v550.hff
Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using HeraFlashPlus version 2.7.0 or higher. In case your HeraFlashPlus version is not the latest one, please download the latest version.
To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of HeraFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.
HeraFlashPlus v2.7.0.zip
Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.
Prontonet User Manual Rev5.4.1.1
ProntonetLC User Manual Rev5.4.1.1
Prontonet IP Decoder User Manual Rev5.4.1.1
ProntoNet Family – What’s new 5.5.0
ProntoNet SDK User’s Manual v2.1.2
Software Development Kit User Manual.
Version 5.4.1 – 15/10/2007
ProntoNet Family v541.hff
Firmware Update.
HeraFlashPlus v2.5.0.zip
Firmware Update Utility : Allows the user to update several units at the same time over WAN. PortaNet/Nereus/ProntoNetLC/IP Decoder/ProntoNet compatible.
Prontonet User Manual Rev5.4.1.1
ProntonetLC User Manual Rev5.4.1.1