Audio Multicodec for IP, ISDN and X21.

Version 6.9.3 – 04/04/2017

Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using ProdysFlashPlus version 3.0.8 or higher. In case your ProdysFlashPlus version is not the latest one, please download the latest version. In case an improper version of ProdysFlashPlus is used, the unit would not be upgraded correctly and might not start properly.

To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of ProdysFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.

Firmware Update Utility: This version of ProdysFlashPlus MUST be used in case of upgrading to firmware version 6.7.8 or higher.

Manual installation of the ActiveX control of the web control page, for those computers not allowing ActiveX installation for security reasons.

Software Development Kit User Manual.

Software Development Kit User Manual.

SolidStream by Prodys enables transmission of STL-grade audio quality over inexpensive IP links such as xDSL connections and 3G/4G links.

Configuration of the N+k function (Device BackUp).

Configuration of the jitter buffer, including the new automatic configuration option.

Configuration and usage of the second LAN interface for control.

VLAN configuration on Prodys IP devices.

Version 6.9.1 – 03/03/2016

Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using ProdysFlashPlus version 3.0.8 or higher. In case your ProdysFlashPlus version is not the latest one, please download the latest version. In case an improper version of ProdysFlashPlus is used, the unit would not be upgraded correctly and might not start properly.

To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of ProdysFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.

Firmware Update Utility: This version of ProdysFlashPlus MUST be used in case of upgrading to firmware version 6.7.8 or higher..

Manual installation of the ActiveX control of the web control page, for those computers not allowing ActiveX installation for security reasons.

Software Development Kit User Manual.

Version 6.8.4 – 10/02/2015

Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using ProdysFlashPlus version 3.0.8 or higher. In case your ProdysFlashPlus version is not the latest one, please download the latest version. In case an improper version of ProdysFlashPlus is used, the unit would not be upgraded correctly and might not start properly.

To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of ProdysFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.

Firmware Update Utility: This version of ProdysFlashPlus MUST be used in case of upgrading to firmware version 6.7.8 or higher.

Manual installation of the ActiveX control of the web control page, for those computers not allowing ActiveX installation for security reasons.

Software Development Kit User Manual.

Version 6.8.1 – 07/07/2014

Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using ProdysFlashPlus version 3.0.8 or higher. In case your ProdysFlashPlus version is not the latest one, please download the latest version. In case an improper version of ProdysFlashPlus is used, the unit would not be upgraded correctly and might not start properly.

To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of ProdysFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.

Firmware Update Utility: This version of ProdysFlashPlus MUST be used in case of upgrading to firmware version 6.7.8 or higher.

Manual installation of the ActiveX control of the web control page, for those computers not allowing ActiveX installation for security reasons.

Software Development Kit User Manual.

Version 6.7.5 – 20/12/2013

Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using ProdysFlashPlus version 3.0.8 or higher. In case your ProdysFlashPlus version is not the latest one, please download the latest version. In case an improper version of ProdysFlashPlus is used, the unit would not be upgraded correctly and might not start properly.

To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of ProdysFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.

Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.

Manual installation of the ActiveX control of the web control page, for those computers not allowing ActiveX installation for security reasons.

Software Development Kit User Manual.

Version 6.6.8 – 28/02/2013

Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using ProdysFlashPlus version 3.0.8 or higher. In case your ProdysFlashPlus version is not the latest one, please download the latest version. In case an improper version of ProdysFlashPlus is used, the unit would not be upgraded correctly and might not start properly.

To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of ProdysFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.

Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.

Manual installation of the ActiveX control of the web control page, for those computers not allowing ActiveX installation for security reasons.

Software Development Kit User Manual.

Version 6.6.6 – 18/10/2012

Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using ProdysFlashPlus version 3.0.8 or higher. In case your ProdysFlashPlus version is not the latest one, please download the latest version. In case an improper version of ProdysFlashPlus is used, the unit would not be upgraded correctly and might not start properly.

To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of ProdysFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.

Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.

Manual installation of the ActiveX control of the web control page, for those computers not allowing ActiveX installation for security reasons.

Software Development Kit User Manual.

Versión 6.6.3 – 26/03/2012

Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using ProdysFlashPlus version 3.0.8 or higher. In case your ProdysFlashPlus version is not the latest one, please download the latest version. In case an improper version of ProdysFlashPlus is used, the unit would not be upgraded correctly and might not start properly.

To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of ProdysFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.

Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.

Manual installation of the ActiveX control of the web control page, for those computers not allowing ActiveX installation for security reasons.

Software Development Kit User Manual.

Versión 6.4.9 – 28/09/2011

Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using ProdysFlashPlus version 3.0.8 or higher. In case your ProdysFlashPlus version is not the latest one, please download the latest version. In case an improper version of ProdysFlashPlus is used, the unit would not be upgraded correctly and might not start properly.

To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of ProdysFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.

Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.

Manual installation of the ActiveX control of the web control page, for those computers not allowing ActiveX installation for security reasons.

Software Development Kit User Manual.

Version 6.3.7 – 18/03/2011

Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using HeraFlashPlus version 2.7.0 or higher. In case your HeraFlashPlus version is not the latest one, please download the latest version.

To upgrade a unit to a firmware version equal or higher than 6.3.3, it is necessary to use HeraFlashPlus version 3.0.6 or higher. In case an improper version of HeraFlashPlus is used, the unit would not be upgraded correctly and might not start properly, but even though, it would be still able to get upgraded via HeraFlashPlus version 3.0.6 or higher.

To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of HeraFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.

Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.

Manual installation of the ActiveX control of the web control page, for those computers not allowing ActiveX installation for security reasons.

Software Development Kit User Manual.

Version 6.3.4 – 22/10/2010

Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using HeraFlashPlus version 2.7.0 or higher. In case your HeraFlashPlus version is not the latest one, please download the latest version.

To upgrade a unit to a firmware version equal or higher than 6.3.3, it is necessary to use HeraFlashPlus version 3.0.6 or higher. In case an improper version of HeraFlashPlus is used, the unit would not be upgraded correctly and might not start properly, but even though, it would be still able to get upgraded via HeraFlashPlus version 3.0.6 or higher.

To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of HeraFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.

Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.

Manual installation of the ActiveX control of the web control page, for those computers not allowing ActiveX installation for security reasons.

Software Development Kit User Manual.

Version 6.3.3 – 01/07/2010

Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using HeraFlashPlus version 2.7.0 or higher. In case your HeraFlashPlus version is not the latest one, please download the latest version.

To upgrade a unit to a firmware version equal or higher than 6.3.3, it is necessary to use HeraFlashPlus version 3.0.6 or higher. In case an improper version of HeraFlashPlus is used, the unit would not be upgraded correctly and might not start properly, but even though, it would be still able to get upgraded via HeraFlashPlus version 3.0.6 or higher.

To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of HeraFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.

Manual installation of the ActiveX control of the web control page, for those computers not allowing ActiveX installation for security reasons.

Software Development Kit User Manual.

Version 6.2.4 – 29/01/2010

Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using HeraFlashPlus version 2.7.0 or higher. In case your HeraFlashPlus version is not the latest one, please download the latest version.

This version is based on version 6.2.3 with one only change, fixing a bug related to the ISDN BackUp feature. Only in case the customer is using the unit with the ISDN line as a backUp of the IP link it is advisable to download this firmware verion and avoid using version 6.2.3 or version 6.1.1

To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of HeraFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.

Version 6.2.3 – 18/01/2010

Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using HeraFlashPlus version 2.7.0 or higher. In case your HeraFlashPlus version is not the latest one, please download the latest version.

To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of HeraFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.

Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.

Manual installation of the ActiveX control of the web control page, for those computers not allowing ActiveX installation for security reasons.

Software Development Kit User Manual.

Version 6.1.1 – 26/10/2009

Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using HeraFlashPlus version 2.7.0 or higher. In case your HeraFlashPlus version is not the latest one, please download the latest version.

To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of HeraFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly

Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.

Manual installation of the ActiveX control of the web control page, for those computers not allowing ActiveX installation for security reasons.

Software Development Kit User Manual.

Version 6.0.5 – 25/03/2009

Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using HeraFlashPlus version 2.7.0 or higher. In case your HeraFlashPlus version is not the latest one, please download the latest version.

To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of HeraFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.

Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.

Software Development Kit User Manual.

Version 6.0.1 – 17/10/2008

Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using HeraFlashPlus version 2.7.0 or higher. In case your HeraFlashPlus version is not the latest one, please download the latest version.

To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of HeraFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly

Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.

Software Development Kit User Manual.

Version 5.9.1 – 23/07/2008

Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using HeraFlashPlus version 2.7.0 or higher. In case your HeraFlashPlus version is not the latest one, please download the latest version.

To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of HeraFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade pro

Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.

Software Development Kit User Manual.

Version 5.8.0 – 13/06/2008

Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using HeraFlashPlus version 2.7.0 or higher. In case your HeraFlashPlus version is not the latest one, please download the latest version.

To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of HeraFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.

Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.

Software Development Kit User Manual.

Versión 5.7.0 – 01/04/2008

Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using HeraFlashPlus version 2.7.0 or higher. In case your HeraFlashPlus version is not the latest one, please download the latest version.

To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of HeraFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.

Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.

Software Development Kit User Manual.

Version 5.6.2 – 05/03/2008

Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using HeraFlashPlus version 2.7.0 or higher. In case your HeraFlashPlus version is not the latest one, please download the latest version.

To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of HeraFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.

Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.

Software Development Kit User Manual.

Version 5.5.0 – 22/11/2007

Firmware Update: This ‘family’ firmware file allows the user to upgrade any of the different Prodys IP codecs with one only file by using HeraFlashPlus version 2.7.0 or higher. In case your HeraFlashPlus version is not the latest one, please download the latest version.

To upgrade a unit with a firmware version lower than 4.7.1, please upgrade the unit with the latest version of HeraFlashPlus to the firmware version 5.4.1, and then upgrade again from version 5.4.1 to the final one. Otherwise, the unit will not upgrade properly.

Firmware Update Utility: This version supports upgrading of the different Prodys IP codecs by using the same ‘family’ firware file, which is available from version 5.5.0 onwards.

Software Development Kit User Manual.

Version 5.4.1 – 15/10/2007

Firmware Update.

Firmware Update Utility : Allows the user to update several units at the same time over WAN. PortaNet/Nereus/ProntoNetLC/IP Decoder/ProntoNet compatible.